Oki PRINTING SOLUTIONS MULTIFUNCTION PRINTER CX2633 - Manual (Page 37)

Configuring Your Machine > 37
Copy Setup
(cont.) Default
Settings
(cont.) EdgeErase OFF, ON Adjust the width settings using the
arrow buttons.
Input range: 05-50 mm
EraseCentr OFF, ON Adjust the width settings using the
arrow buttons.
Input range: 01-50 mm
DuplexCopy Copy Method:
OFF, 1->2 sides,
2->2 sides,
2->1 side
Doc. Direction:
Binding
Right&Left, Top Allows you to define simplex or
duplex and the binding orientation.
Mixed Size OFF, ON Allows you to load originals of
same width but different length in
the ADF.
When enabled, the tray setting is
automatic, you cannot specify a
tray manually.
Scan Size Auto, A3, B4, A4,
A4 (SEF), B5,
B5 (SEF), A5,
A5 (SEF), Letter,
Letter (SEF), Tabloid,
Legal 14, H.LTR Allows you to select the scan size.
Cont. Scan OFF, ON Allows you to continue scanning
more documents. Allows you to
construct a single scan job from
multiple individual sheets or
originals.
Contrast -3, -2, -1, 0, +1, +2,
+3 Adjust contrast setting.
High: Enhance brightness
Low: Reduce brightness
FEATURE OPTION DESCRIPTION