Oki PRINTING SOLUTIONS MULTIFUNCTION PRINTER CX2633 - Manual (Page 160)

Troubleshooting > 160
Error Check data
Message Data Write Error <%CODE%> Indicates that message data to be
updated has failed.
%CODE% is a decimalvalue (one digit)
and represents the cause of failure:
1. FAIL: Other errors.
2. DATA_ERROR: Hash check error in
data reading/writing, or abnormal
FLASH.
3. OVERFLOW: Downloading failure due
to FLASH memory full at starting or
during writing in a language file.
4. MEMORYFULL: Memory reservation
failure.
5. UNSUPPORTED_DATA: Downloading
data unsupported on the MFP.
Error Wait a moment
Network Configuration Writing Displays during the NIC configuration
data is storing in the flash memory, as
the setting was changed.
Error Wait a moment
Network Initializing Diplays when the NIC initialisation
occurs, as the setting is changed.
Error No Paper
On %TRAY%
Please set paper %MEDIA_SIZE%
To cancel
Select [Cancel]. Printing request is issued to an empty
tray.
%TRAY%
490: MPTray
491: Tray 1
492: Tray 2
493: Tray 3
Load media into tray to allow printing.
Error
440
441 %TRAY% Missing
Please close %TRAY%.
To cancel
Select [Cancel] Indicates removal of Tay 1 which is a
paper path when printing from Tray 2.
Reinstall Tray 1 to allow printing.
Error
430
431 %TRAY% Missing
Please close %TRAY%.
To cancel
Select [Cancel] Paper tray has been removed. Reinstall
tray to allow printing.
%TRAY%
Tray 1
Tray 2
Tray 2
Error
420 Memory Overflow
Memory Overflow Memory capacity overflow.
Press the on-line key to continue
printing.
Install expansion RAM or decrease data
size.
STATUS /
CODE MESSAGE MEANING / ACTION