Omron NT-series Programmable Terminal V022-E3-1 User Manual
Page 90

Initialize the Memory Tables?
Confirm
Cancel
Reference
Reference
[ SYSTEM MENU ]
Quit
Transmit Mode
Maintenance Mode
[ MAINTENANCE MENU ]
Quit
PT Setting Status
I/O Check
Display History
Memory Init.
Memory Switches
%/ .
Section 3-4
Select “Confirm”.
The memory table is initialized.
If “Cancel” is selected instead of “Confirm”, the NT600S returns to the “Memory
Initialization Menu” without initializing the memory.
If a memory table is initialized in the Maintenance Mode, it is initialized regard-
less of the setting for the resume function (resume function: page 98).
Initialization of the Display History Data Memory
The display history (page 110) is stored in the order of occurrence (time order) or the
order of frequency (frequent order). Since no more display history data can be
stored if the memory becomes full, the memory has to be initialized at regular inter-
vals.
The display history data memory can be initialized by a command given from the
Host.
Using the System Menu, initialize the display history data memory by following the
procedure given below.
Select “Maintenance Mode”.
Select “Memory Init.”.