Omron NT-series Programmable Terminal V022-E3-1 User Manual
Page 105
[ MAINTENANCE MENU ]
Quit
PT Setting Status
I/O Check
Display History
Memory Init.
Memory Switches
Comm. Method
Key Press Sound
Buzzer Sound
Host Link
OFF
Putting-Out Time
Resume Function
OFF
None
ON
[ MEMORY SWITCH MENU (1/2) ]
Support Tool Mode
NT600S
EXIT
SAVE
EXIT
NEXT
PAGE
Automatic Reset
Host Link Speed
ON
19200bps
[ MEMORY SWITCH MENU (2/2) ]
EXIT
SAVE
EXIT
PREV.
PAGE
- $0& 1 . -
Section 3-6
Select “Memory Switches”.
Select “NEXT PAGE”.
Each time the “Automatic Re-
set” touch switch is pressed, the
setting option changes from
“ON” to “OFF” or from “OFF” to
“ON”.
The menu display differs ac-
cording to the communication
method (see page 83).
To set and quit the menu, press the [SAVE EXIT] touch switch. To quit without
setting, press [EXIT].
“OFF”: If a communication error has occurred, corresponding error message is
displayed and the operation stops.
“ON”: If a communication error has occurred, corresponding error message will
not be displayed and the operation will be automatically reset.