Runco LIGHTSTYLE LS-10D - Manual (Page 39)

Installation
Runco LS-10d Installation/Operation Manual 23
PRE
L
IMINAR
Y
Other Considerations Other considerations and tips that can help improve your installation:
• Keep the ambient temperature constant and below 35°C (95°F). Keep the projector
away from heating and/or air conditioning vents. Changes in temperature may cause
drifts in the projector circuitry, which may affect performance.
• Keep the projector away from devices that radiate electromagnetic energy such as
motors and transformers. Common sources of these include slide projectors,
speakers, power amplifiers and elevators.
3.4
Installing the Optional
Anamorphic Lens
Mount If you are installing a standard LS-10d (without an anamorphic lens), skip this step and
proceed with Mounting the LS-10d (page 28).
If you are installing an LS-10d with an anamorphic lens, proceed as follows to install the
lens mount and transport assembly.
Package Contents The LS-10d Anamorphic lens mount kit consists of the following items. Some
components shipped with your projector may differ slightly from what is shown in these
instructions. If any items are missing or damaged, please contact your Runco dealer or
Runco Customer Service at (800) 23RUNCO.
• Transport Assembly Attachment Plate
• Attachment plate hardware (screws,
washers and spacers)
• Attachment plate security hooks and
related hardware (chain, chain ends,
nuts and washers)
• Transport Assembly
• Transport mounting hardware
• Lens bracket mounting hardware
• Power supply
• Remote control unit and batteries
1. Do not install the anamorphic lens yet, only the lens mount and
transport assembly. You will install the anamorphic lens after you
install the projector and adjust the primary lens.
2. Some components shipped with your projector may differ slightly
from what is shown in these instructions.
Note