Runco LIGHTSTYLE LS-10D - Manual (Page 35)

Installation
Runco LS-10d Installation/Operation Manual 19
PRE
L
IMINAR
Y
Table 3-3 lists the available lens options for the LS-10d and their associated throw ratios.
Table 3-3. LS-10d Lens Options and Throw Ratios (Note 1)
Lens Option
Throw Ratio
with Primary
Lens Only
Throw Range in
inches, with
96x54-inch (1.78:1)
Screen
Throw Ratio
with Primary
Lens and
Anamorphic
Lens
Throw Range in
inches, with
126.9x54-inch (2.35:1)
Screen
Minimum Maximum Minimum Maximum
Proteus 1 0.77 (Fixed)
For rear-screen installa-
tions only. Contact
Runco Technical Support
for more information.
Not Applicable
(Note 2)
Proteus 2 1.45 - 1.74 139.20 167.04
Proteus 3 1.74 - 2.17 167.04 208.32 1.30 - 1.63 164.97 206.85
Proteus 4 2.17 - 2.90 208.32 278.40 1.63 - 2.17 206.85 275.37
Proteus 5 2.90 - 4.34 278.40 416.64 2.17 - 3.26 275.37 413.69
Proteus 6 4.34 - 6.76 416.64 648.96 3.26 - 5.07 413.69 643.38
Notes:
1. Due to normal manufacturing variances, throw distance can vary by up to +/- 5 percent from
these specifications.
2. Only the Proteus 3, 4, 5 and 6 lenses can be used with the optional anamorphic lens. Doing so
affects the throw distances as shown here.