Runco LIGHTSTYLE LS-10D - Manual (Page 105)

Specifications
Runco LS-10d Installation/Operation Manual 89
PRE
L
IMINAR
Y
7.2
DHD Controller
Specifications Table 7-2 lists the DHD Controller specifications.
Table 7-2. DHD Controller Specifications
Aspect Ratios: 4:3, Letterbox, 16:9, VirtualWide, Cinema, Virtual Cinema,
Native
Video Standards: NTSC, PAL, SECAM, ATSC
Inputs: (3) Composite
(1) Component/SCART (3 x RCA)
(2) Component/RGBHV (5 x BNC)
(4) HDMI with HDCP
Output: HDMI with HDCP
Control Options: - Consumer Electronics Control (CEC) protocol support
via HDMI
- Discrete infrared remote
- Serial commands via RS-232
- Front-panel controls
RS-232 Communication
Parameters: 19200 bps, no parity, 8 data bits, 1 stop bit, no flow control
Trigger Outputs: (3) +12 VDC, each rated at 250 mA and thermal
fuse-protected
Bandwidth: 150 Mega Samples per Second (MSPS)
Power Requirements: 100 to 240 VAC (auto-sensing), 50/60 Hz, 160 watts
Operating Environment: 41°F to 95°F (5°C to 35°C), 0% to 90% humidity
(non-condensing)
Dimensions: Width = 17.50 inches (444.5 mm)
Depth = 11.19 inches (284.1 mm)
Height = 3.75 inches (95.3 mm)
Weight: 13.0 lbs. (5.90 kg)
Regulatory Approvals: Complies with FCC, CE C-Tick
Limited Warranty: Two (2) years parts and labor from the date of shipment from
Runco.
Specifications are subject to change without notice.