Runco LIGHTSTYLE LS-3 User Manual
Ls-3 series ls-5 series
This manual is related to the following products:
Table of contents
Document Outline
- RuncoCare™ Standard Two Year Limited Warranty
- Important Safety Instructions
- Compliance Information
- 1. Introduction
- 2. Controls and Functions
- 2.1 LS-3/LS-5 at a Glance
- 2.2 LS-3/LS-5 Rear Panel
- Figure 2-3 . LS-3/LS-5 Rear Panel
- 2.3 LS-3/LS-5 Remote Control
- 3. Installation
- 3.1 Remote Control
- 3.2 Quick Setup
- 3.3 Installation Considerations
- 3.4 Installing the Optional CineWide Lens Mount
- 3.5 Mounting the LS-3/LS-5
- 3.6 Connections to the LS-3/LS-5
- Connector Panel Access
- Connecting Source Components to the LS-3/LS-5
- HDMI/DVI Connections
- RGB Connections
- Component Video Connections
- Figure 3-10 . Component Video Connections
- Composite/S-Video Connections
- RS-232 Controller Connection
- Connecting 12-Volt Trigger Output to External Theater Equipment
- Connecting an External IR Receiver
- Connecting to AC Power
- 3.7 Turning on the Power
- 3.8 Lens Adjustments
- 3.9 Changing the OSD Language
- 3.10 Adjusting the Picture Orientation
- 3.11 Installing and Adjusting the CineWide Anamorphic Lens
- 4. Operation
- 4.1 Selecting Video Memory
- 4.2 Selecting an Aspect Ratio
- 4.3 Selecting An Input Source
- 4.4 Using Picture-In-Picture (PIP)
- 4.5 Using the On-Screen Menus
- Figure 4-1 . LS-3/LS-5 OSD Menu Structure
- Main
- Advanced
- System
- Control
- 1 Key / 2 Key / 3 Key / 4 Key / 5 Key
- M1 Key / M2 Key / M3 Key
- Trigger 1
- Trigger 2 (LS-5 only)
- Remote Code Set
- Auto Source
- Language
- Service
- 5. Maintenance and Troubleshooting
- 6. Serial Communications
- 7. Specifications
- 7.1 LS-3/LS-5 Specifications
- Table 7-1 . LS-3/LS-5 Specifications
- 7.2 LS-3/LS-5 Dimensions
- 7.3 Supported Timings
- 7.1 LS-3/LS-5 Specifications