Runco 3DIMENSION D-73D User Manual
3dimension™ series d-73d
Table of contents
Document Outline
- RuncoCare™ Standard Two Year Limited Warranty
- Important Safety Instructions
- Compliance Information
- 1. Introduction
- 2. System Overview
- 3. Installation
- 3.1 Remote Control
- 3.2 Quick Setup
- 3.3 Installation Considerations
- 3.4 Installing the Optional Anamorphic Lens Mount
- 3.5 Mounting the D-73d
- 3.6 Mounting the DHD Controllers and 3Dimension Processor
- 3.7 System Interconnections
- Connecting the Primary and Secondary DHD Controllers to the D-73d Projector
- Connecting the Primary and Secondary DHD Controllers to Each Other and to the 3Dimension Processor
- Connecting an Audio Processor or Secondary Display Device to the Primary DHD Controller (Optional)
- Additional Connections to the Primary DHD Controller (Optional)
- Connecting Source Components to the 3Dimension Processor
- Connecting to AC Power
- 3.8 Power-Up Sequence and Optical Alignment Procedure
- Table 3-6 . D-73d Optical Alignment Procedure (with Anamorphic Lenses)
- Anamorphic Lens Installation (D-73d/CineWide with AutoScope Only)
- Unlocking the Primary Lenses
- Turning on the Power
- Adjusting the Focus, Zoom and Position of the Primary Lenses
- Adjusting the Picture Orientation
- Anamorphic Lens Installation
- Anamorphic Lens Adjustment
- Adjusting the Image Geometry
- 4. Operation
- 4.1 Using the On-Screen Menus
- Figure 4-1 . D-73d OSD Menu Structure
- Main Menu
- Input Source
- Aspect Ratio
- Screen
- Picture
- Input Position
- Memory Presets
- 3D Processing
- Sleep Timer
- Information
- Calibration
- Service
- 4.1 Using the On-Screen Menus
- 5. Maintenance and Troubleshooting
- 6. External Control
- 7. Specifications