Roland PCR-80 - Manual (Page 24)

24
Installing & Setting Up the Driver (Windows)
6
Make MIDI device settings on your sequencer software. For details on the
MIDI OUT/IN device to select, refer to About the ports when using a USB
connection (p. 159).
Windows 98 users
1
Open Control Panel .
Click the Windows Start button, and from the menu that appears, select
Settings | Control Panel .
2
Open the Multimedia Properties dialog box.
In Control Panel , double-click the Multimedia icon to open the “Multimedia
Properties” dialog box.
fig.2-29_30
3
Click the MIDI tab.
4
Set “MIDI output” .
Select [Single instrument] , and select
the MIDI device from the list that
appears.
If you want to use Media Player to
play a sound module connected to the
PCR's MIDI OUT connector, select
EDIROL PCR MIDI OUT .
5
Close the Multimedia Properties
dialog box.
Click
OK to complete the settings.
6
Make MIDI device settings on your sequencer software. For details on the
MIDI OUT/IN device to select, refer to “About the ports when using a USB
connection” (p. 159).
For details on MIDI device
settings, refer to the
owner's manual for the
software you are using.
This completes driver settings.
Select the appropriate
MIDI device for your
system. You do not
necessarily have to select
EDIROL PCR MIDI OUT .
For details on port, refer to
“About the ports
when using a USB
connection” (p. 159).
For details on MIDI device
settings, refer to the
owner's manual for the
software you are using.
This completes driver settings.