RuggedCom RUGGEDSWITCH RSG2288 - Manual (Page 31)

4. Technical Specifications
RuggedCom® RuggedSwitch® 31 RSG2288 Installation Guide Rev 108
4.4. Copper Ethernet Port Specifications
Parameter Specification Notes
Speed 10/100/1000 Mbps Auto-negotiating;
Duplex FDX / HDX Auto-negotiating
Cable-Type > Category 5 Shielded/Unshielded
Wiring Standard TIA/EIA T568A/B Auto-Crossover, Auto-Polarity
Max Distance 100 m
Connector RJ45
Isolation 1.5kV RMS 1-minute
Table 4.4. Copper Ethernet Port Specifications
4.5. Fiber Optic Specifications
The following sections list fiber optic specifications for ports that can be ordered with an RS2000
series Ethernet switch. The user determines the type of optics at the time of ordering, and
can determine the modules installed on a particular unit by reading the factory data file via
the RuggedSwitch ROS® user interface. The following sections list specifications for fiber optic
modules in Fast Ethernet(10/100Mbps) and Gigabit Ethernet (1000Mbps).
4.6. Fiber Ethernet Port Specifications
The specifications are organized by signaling speed and then by order code. Module order codes
are contained within each product when assembled and configured at the factory. Consult the
RuggedCom ROS® User Guide for help in obtaining the factory configuration data.