Revox Recontrol M207 - Manual (Page 76)

Troubleshooting Tables
73
Problem Solution
your AV devices:
- Repeat the learning procedure again.
- If you still can’t solve the problem, contact us for help.
- Original remote might not be compatible with learning
procedure.
Macro does not work. • Be sure to aim the Re:control M207 at the devices while the
macro commands are being sent.
• Macro was not properly set up. Repeat macro set-up
procedure.
A key of your existing
remote performs two or
more functions
• Some remotes issue multiple commands when a key is held
down. Please be sure to teach different keys of Re:control
M207 for these different commands.
• Each key of the Re:control M207 can only learn one command.
E.g. Cycle key
The LCD screen turns off.
• The Re:control M207 is preset automatically to switch the LCD
off after 1 minute by default if left unused.
• Just tap the touch screen to turn the Re:control M207 back on
again.