Revox Recontrol M207 - Manual (Page 44)

Chapter 3 How to Set Your Re:control M207
41
3.10 Delete Device/Key codes
With the function, you can delete the codes in the keys.
1. Please press the
button for 1 second to enter Setup Menu. And
then enter “Code Setting” menu.
2. Please choose the “ Del.Code” item and then enter the submenu.
3. On pressing the soft key, you will see the direction for the function. After
reading the tips, please press the button to go to the next step.
4. Please select the device you want to delete. And then you need to
make a decision: to delete all the codes for the device or to go into
device to delete the codes for its keys.
5. If you select a device to delete, you will see a message to confirm
your decision. Please choose “Yes” or “No” to confirm your decision.
6. If you go into device to delete the codes for its keys, you will delete
the codes directly by taping the soft keys.
The “Del.Code.” function is similar to “Delete” (P33)
function. However, “Del.Code” just deletes the codes
for the keys. “Delete” will delete both the keys and
codes.