Revox Recontrol M207 - Manual (Page 19)

16
Chapter 2 Quick Start
In this chapter, you are able to know how to set up the Re:control M207
quickly without through complicate procedure.
When turn on the Re:control M207, at first you will see the welcome
greeting message shown on the screen. From now on, you formally
enter the setup procedure. Please operate by the following instructions
step by step.
2.1 Re-calibrate the screen
1. Press button for 1 second for entering Setup Menu.
2. Scroll the or buttons to choose Setting item and
press button for entering “Setting” menu.
3. Scroll the or buttons to select Calibrate item and
press button for entering “Calibrate Panel” operation screen for
screen calibration.
4. Tap the 5 places following up screen indication step by step.
When finished, the screen will go back to previous “Setting” menu
automatically.
If you want to exit from the current display, please press
button until back to the main menu.