Revox Recontrol M207 - Manual (Page 59)

Re:control M207 User’s Manual
56
4.2 Key Layout
Add Device
1. To add your devices to the Re:control M207.
2. You can use “Pre-code” or “Learning” to load the codes for the
device by the way.
3. (Please refer to Chapter 3.1 Add a Device on page 20.)
Add Key
1. To add new keys to your devices in the Re:control M207.
2. You can use “Pre-code” or “Learning” to load the codes for the
device by the way. (Please refer to 3.2 Add a Device on page
26.)
Add Text
1. To add a description for a specific device key or a key.
(See 3.3 Add a Text on page28.)
Re-size
To resize a specific device key or a key or a text.
You can also change the location of keys with the function.
(See 3.5 Re-size a Device, Key or Text on page 31.)
Delete
To delete a specific device key or a key.
The function also deletes both the keys and codes at the same
time.
(See 3.6 Delete a Device, Key or Text on page33.)