Revox Recontrol M207 - Manual (Page 43)

Re:control M207 User’s Manual
40
3. On pressing the soft key, you will see the direction for the function.
After reading the tips, please press the button to go to the next
step.
4. Please choose any of keys (except Device key) you will use as Cycle
keys.
5. Please have your original remote pointed to the ”Learning Eye” at the
bottom of the Re:control M207. And then press the corresponding
key on your original remotes for about 2-3 seconds until the symbol
shows up on LCD.
You can save 6 cycle commands at most in the Cycle key.
6. Please press the button when you finish learning all the circle of
commands.
When you have saved some commands in a
Cycle keys, a specific sign will be marked on
the Cycle key.