Revox Recontrol M207 User Manual
Page 28
Chapter 3 How to Set Your Re:control M207
25
1. When you successfully add a new device, please decide if you
continue to load the codes for the device. Choose the
“
Learning” item, to get the remote codes.
2. The specific key needs to be learned will be shown in black on
LCD. The Re:control M207 will automatically guide you to
learn the remote code for each key one by one. However, you
can also change the sequence as you like by taping any key
you want to learn.
=
The first page will guide you to learn the rubber keys on the
Re:control M207 step by step.
3. At the moment, please have your original remote pointed to
“Learning Eye” (P.8) at the bottom of the Re:control M207.
And then press the corresponding key on your original remote
for about 2-3 seconds “UNTIL” the symbol
shows up on
LCD to make sure the Re:control M207 learn the code
completely.