Revox Recontrol M207 - Manual (Page 62)

Chapter 4 Menus
59
4.5 Duplicate
Duplicate
You can connect two Re:control M207s with
Transmit Wire. (Appendix B P. 71) And then you
duplicate the settings in one remote and transfer
then to the other one.
With the function, you are able to transfer your settings to the other
Re:control M207 with Transmit Wire.
1. Please connect two Re:control M207s A and B, by using Transmit
Wire.
2. If you intend to transfer the settings in A to the other one, please
select the “A” Re:control M207 to start the duplication.
3. Please press the button for 1 second to enter the “Setup
Menu”. And then enter Duplicate directly.
4. On pressing the soft key, you will see a message to confirm your
decision.
5. If you decide to duplicate these settings. Please tap “Yes” then
start the duplication.
If you have lots of settings in the original remote, it
will take more time to duplicate the settings for the
other remote.