7 pre-code – Revox Recontrol M207 User Manual

Page 37

Re:control M207 User’s Manual

8. Please press the button to exit after you finish the delete

function.

If you have saved the remote codes in the device or the soft
key, “Delete” function will erase not only the icons but also
the remote codes. You will see a message to confirm your
decision, when the Re:control some codes are saved in your
target.

3.7 Pre-code

The Re:control M207 is equipped with a mass pre-programmed code
database. With the function, you are able to load the code for your

device. It also enables you to control your device even if you lose your

original remote.

1. Please press the

button for 1 second to enter Setup Menu. And

then enter “Code Setting” menu.

2. Please choose the “

Pre-code” item and press the

button to

enter the submenu.

3. You will see the indication for the function. After reading the tips by

press the

to read the information pages. After reading

the tips, press

button to exit and enter the next step.

4. Please select the device which you want to load the remote codes.
5. After pressing the soft key, you will see the help guide for the

function. After reading the tips, please press the

button to go to

the next step.