Revox Recontrol M207 - Manual (Page 60)

Chapter 4 Menus
57
4.3 Code Setting
Pre-code
To load the pre-programmed codes for your devices.
(Please refer to 3.7 Pre-code on page 34.)
Learning
To use the function to learn the IR codes from your remotes.
(Please refer to 3.8 Learning on page37.)
Macro
To add Normal Macros to your Re:control M207.
You can use all the keys as your Normal Macros except
device keys.
*You cannot setup a timer for a Normal Macro.
(Please refer to 3.11.1 Macro on page 42.)
Cycle
To add Cycle keys to your Re:control M207.
(Please refer to 3.9 Learn a Cycle key on page 39.)
Del. Code
To remove the coeds setup in the devices or keys.
You won’t erase the keys in using the function.
(Please refer to 3.10 Delete Device/Key codes on page41.)