Roland FP-7 - Manual (Page 92)

92
Recording
You can easily record your performances.
You can play back a performance you have recorded to check what and how you
played, and play melodies on the keyboard along with prerecorded accompaniment
using the Rhythm.
Memo
• The song you record will disappear when you turn off the power of the FP-7.
You should save your important performances in internal memory or on external
memory, such as separately available USB memory.
➝ “Saving the Songs You Record” (p. 105)
• With second or later recordings, the previously recorded song is erased as the new
material is recorded. When recording a new performance, it is probably a good
idea to erase the previously recorded performance first (p. 103).
• About the Track Buttons
Track buttons Description
Blinking
The performance will be recorded.
If performance data already exists, the existing performance will be erased
and replaced as the new recording proceeds.
Lit
The performance will not be recorded.
During recording, the performance located at this track button will play back.
Unlit
The performance will not be recorded.
This track does not contain performance data.
If the Following Display Appears
If there is a song you’ve recorded but not saved, a screen like the following will appear
if you attempt to select a different song.
fig.d-dEL.eps
You can’t play back an internal preset song or song saved on USB memory if you have
not yet saved the song you recorded. If it is OK to erase the song, hold down the [Display]
button and press the [+] button to select “OK,” then press the [Rec] button. If you don’t
want to erase the song, select “Cancel” and press the [Rec] button. Save the song in USB
memory or internal memory (p. 105).
FP-7-e.book 92 ページ ２００６年１２月１４日 木曜日 午前１０時５７分