Roland FP-7 - Manual (Page 157)

157
Error Messages
* External Media: USB memory, etc.
* Press [Display] button, and you can cancel the error message.
Indication Meaning
Error: 1 You can only read the music file. It can not be saved.
Error: 2
An error occurred during writing.
The external media’s protect tab may be in the “Protect” (writing prohibited) position, or the external media
may not yet be initialized.
Error: 10 No external media is inserted. Insert the external media and try again.
Error: 11
There is not sufficient free memory in the save destination.
Delete unneeded files (Songs or Registration Sets) you’ve saved in internal memory and try again.
Error: 14
An error occurred during writing. The external media may be corrupted.
Insert other external media and try again. Alternatively, you can initialize the external media.
Error: 15 The file is unreadable. The data format is not compatible with the FP-7.
Error: 16
Data was not called up in time for playback of the song.
After waiting several seconds, you may be able to play back the song by pressing the [Play] button again.
Error: 18
This audio format is not supported.
Please use 44.1 kHz 16-bit linear WAV format audio files.
Error: 30 The internal memory capacity of the FP-7 is full.
Error: 40
The FP-7 cannot deal with the excessive MIDI data sent from the external MIDI device.
Reduce the amount of MIDI data sent to the FP-7.
Error: 41
A MIDI cable has been disconnected.
Connect it properly and securely.
Error: 43
A MIDI transmission error has occurred.
Check the MIDI cable and connected MIDI device.
Error: 51
There may be a problem with the system.
Repeat the procedure from the beginning. If it is not solved after you have tried several times, contact the
Roland service center.
Error: 65
The External Memory connector was subjected to excessive current.
Make sure that there is no problem with the external media, then turn the power off, then on again.
FP-7-e.book 157 ページ ２００６年１２月１４日 木曜日 午前１０時５７分