RCA HT35713BD - Manual (Page 31)

29
For complete operating information about your CD changer, see the CD changerÕs UserÕs Guide.
To Play a CD
1. Press CD on the remote to turn on the CD changer and audio/video receiver. This also sets
the remote to operate the CD changer.
2 . Press OPEN/CLOSE on the CD changer to open disc tray. Load disc with the label side up
in the disc tray.
To load more discs press SKIP on the changer to rotate the carousel and load up to five discs
at one time.
3 . Press PLAY. The changer will begin playing the lowest number disc in the tray and continue
to play until all of the discs are played.
4 . Press STOP when you are finished playing the disc.
To Select a Specific Disc
1 . Press CD on the remote to place the remote in the CD mode.
2 . Press PREV CH•DISC and then the disc number on the remote or DISC NUMBER on the
changer to select a specific disc.
To Select a Specific Track
1 . Press CD on the remote to place the remote in the CD mode.
2 . During playback, press the REW button to return to the beginning of the track that is
playing. Repeatedly press REW to return to the beginning of previously played tracks.
Press the FF button to advance to the beginning of the next track. Repeatedly press FF to
advance one track for each press.
Using Your CD Changer
Note: If the CD changer does not turn on when you press the CD button, check to make sure that
the POWER button on the front of the changer is pressed into the on position.