Recording while youõre away and timer recording, Using your vcr, Recording while you’re away – RCA HT35713BD User Manual
Page 25: Timer recording, Stopping a timer recording in progress
23
Recording While You’re Away
Timer and VCR Plus+ recordings let you program the VCR to record up to eight different programs
within a one-year period. Before recording, make sure that:
¥ The clock is set correctly.
¥ A tape with safety tab has been inserted with enough tape to record the program(s).
VCR MAIN MENU
1 VCR Plus+ Programming
2 Timer Programming
How often should this
program record?
1 One time
2 Daily (every day)
3 Weekdays (Mon - Fri)
4 Weekly (once/week)
PROGRAM 1 - ONE TIME
Channel -- CABLE
PROGRAM 1 - ONE TIME
Channel 08 CABLE
Start Time --:--
PROGRAM 1 - ONE TIME
Channel 08 CABLE
Start Time 02:10 PM
End Time --:--
PROGRAM 1 - ONE TIME
Channel 08 CABLE
Start Time 02:10 PM
End Time 03:35 PM
Start Date 11/18/94 Fri
Tape Speed SLP
Press CLEAR to correct
Press MENU to save
Program 1
has been saved
Timer Recording
1.
Press
VCR1
on the remote to turn on the VCR, audio/video
receiver, TV, and tune the TV to channel 91 (Input 1). This
also sets the remote to control the VCR.
2
. Press
MENU PROGRAM
on the remote to display the
VCR
MAIN MENU
.
3
. Press
2
to select the
Timer Programming
menu.
4
. Press
1
,
2
,
3
, or
4
to select type of program.
1 One time
Ñ single program recorded once.
2 Daily
Ñ program recorded at same time every day.
3 Weekdays
Ñ program recorded at same time Monday
through Friday.
4 Weekly
Ñ program recorded at same time once a week.
5
. Press number buttons on the remote to enter the channel
number, start time including AM or PM, end time, and start
date of the recording. Just follow the on-screen prompts.
Press
CLEAR
to correct an entry.
6
. Select recording speed using the
SPEED
button on the
VCRÕs remote or on the VCR.
7
. Press
MENU PROGRAM
to enter your program. A
reminder appears which times out or you can press
MENU PROGRAM
to return to the
VCR MAIN MENU
.
PROGRAMS OVERLAP
may appear on the screen if you
have entered two programs where the times overlap.
8
. Repeat steps
2–7
for additional programs or press
MENU PROGRAM
to remove the menu from the TV screen.
9
. Turn off the VCR before the recording is scheduled to begin.
TIMER
appears in the VCRÕs display panel when the timer
has been programmed.
Stopping a Timer Recording in Progress
1.
Press
VCR1
and then
STOP
within a few seconds on the
remote or press
POWER
and then
STOP
within a few
seconds on the VCR.
Using Your VCR
(Continued)