RCA HT35713BD - Manual (Page 28)

26
If your system came with, or you have added, an RCA Digital Satellite System, you can
press the
DSS•CABLE on the remote and the DSS ¨ receiver, audio/video receiver, and TV
will turn on and the TV will tune to channel 90 (S-Video Input).
For more detailed instructions see the satellite receiver userÕs manual.
To Watch a Program
1 . Press DSS•CABLE on the remote to turn on the satellite receiver, audio/video receiver,
TV, and tune the TV to channel 90 (S-Video Input). This also sets the remote to control the
satellite receiver.
2 . Press CHANNEL up or down to select channels, or press number buttons to directly access
a channel. To find a channel using the on-screen channel guide, see the next page.
DSS Main Menu
Use the arrows to point to an item, then press SELECT
Pressing the number also selects the item.
1 Program Guide
2 Attractions
3 Alternate Audio
4 Mailbox
5 Options
6 Help
0 Exit
1 Show the on-screen programming schedule
*DSSª is a trademark of DIRECTV, Inc., a unit of GM Hughes Electronics.
Point and Select Menu System
The receiver has interactive menus and operating guides that use the ÒPoint and
SelectÓ method.
1 . Press DSS•CABLE on the remote to turn on the satellite receiver, audio/video
receiver, TV, and tune the TV to channel 90. This also sets the remote to control the
satellite receiver.
2 . Press MENU/PROGRAM to display the DSS Main Menu.
3 . ÒPointÓ to the item you want to select using the arrow buttons at the bottom of the remote.
4 . ÒSelectÓ the item using the DISPLAY button on the remote.
5 . Follow the on-screen instructions.
Using Your DSS
®
Receiver (optional with some systems)
Note: You can also select a menu item by pressing the corresponding number on the remote.
Press
CLEAR on the remote to remove a menu from the screen.
Note: Whenever the on-screen display says to press the SELECT button, you must press the
DISPLAY button on the system remote.