RCA RTB1100 - Manual

AVC Multimedia Markham, Ontario L3R 1E3 Made in China / Fabriqué en Chine Fabricado en China
RTB1100
AC 120V 60Hz
USB TERMINAL:DC 5V 500mA
Cinéma Maison avec Lecteur Blu-ray
Blu-ray Home theater
teatro en Casa Blu-ray
Quick Setup Sheet
RTB1100
Congratulations on purchasing your new RCA product.
Please read these instructions for quick setup sheet on using the product.
VOLUME +/- Buttons
Adjusts the volume.
REaR ViEw
FROnt ViEw
Blue Speaker terminals
C o n n e c t t h e b l u e a n d
black wires from Rear Left
Speakers (surround sound)
to the terminals.
notes:
1.
The AC power plug is polarized
(one blade is wider than the
other) and only fits into AC
power outlets one way. If the
plug won’t go into the outlet
completely, turn the plug over
and try to insert it the other way.
2. The HDMI output will give
you the highest quality video
connection.
3.
To receive clear reception,
AM and FM antennas must be
hooked up.
Specifications and external appearance
are subject to change without advance
notice due to continuous product
improvement.
SOURCE Button
Selects the input sources. Press repeatedly
to select between:
• BD/USB – to watch BD/DVD discs, or
photos and video files stored on to a data
disc or USB flash drive.
• OPTICAL – to select the digital audio input.
• AUX – to select the analog audio input.
• TUNER – to listen to the radio.
Gray Speaker terminals
Connect the gray and black
w i r e s f r o m R e a r R i g h t
Speakers (surround sound)
to the terminals.
Composite Video Out Jack
Use to connect the VIDEO OUT
jack on the back of the unit to
the Video IN jack on your TV
(shown as right) so that the
video content goes from the
unit to the TV screen.
tV
aUDiO in Jack
Use to connect the AUDIO IN jacks on
the back of the unit to the AUDIO OUT
jacks on TV, VCR, SAT/Cable Box or
others (TV example shown here).
VCR Sat/Cable Box
tV
Composite Video Out Jack
Use to connect
the COMPONENT VID-
EO OUT jacks (Y, P
B
, P
R
) on the back
of the unit to the component video IN
jacks on your TV (shown at right) so
that the video content goes from the
unit to the TV screen.
tV
aM Loop antenna
1. Uncoil the AM antenna wire.
2. Press down on the antenna tabs to open the terminals.
3. Insert the white wire on the AM loop antenna into the
AM loop terminal and the other into the ground(GND)
loop terminal. (See note 3)
FM antenna
C o n n e c t t h e FM
antenna to the FM
terminal.
aM
antenna
FM antEnna
Lan (Ethernet) Jack
Use to connect an Ethernet cable (CAT5 or better with
RJ45 connector) to the ETHERNET jack on the back of
your player and to an Ethernet jack on a broadband hub
or router. Hub or network Router
white Speaker terminals
C o n n e c t t h e w h i t e a n d
black wires from Front Left
Speaker to the terminals.
Optical in Jack
Use to connect the OPTICAL DIGITAL IN jack on
the back of the unit to the OPTICAL OUT jack on
TV, VCR, SAT/Cable Box or other component.
VCR Game Console
tV
HDMi Out Jack
Use to connect
an HDMI cable from
HDMI IN jack on the TV to the HDMI
OUT jack on this unit.
(See note 2)
aUDiO OUt Jacks
Use to connect the AUDIO OUT jacks from
the unit to the AUDIO IN jacks on TV, VCR,
Stereo system or other audio component.
VCR Stereo System
tV
StOP Button
Stops playback.
OPEn/CLOSE Button
Opens and closes the disc
tray.
PLaY/PaUSE Button
Starts/pauses playback.
Switches the unit on and off.
StanDBY/On Button
USB Port
For connection of USB flash
drives.
Purple Speaker terminals
C o n n e c t t h e p u r p l e a n d
black wires from Subwoofer
Speaker to the terminals.
Green Speaker terminals
Connect the green and black
wires from Center Speaker
to the terminals.
Red Speaker terminals
Connect the red and black
w i r e s f r o m F r o n t R i g h t
Speaker to the terminals.
aC Power Cord
Connect the AC power
plug into the AC power
outlet. (See note 1)