RCA HT35713BD - Manual (Page 11)

9
Buttons
Audio/Video Receiver Function
Press the AM•FM button to turn on the receiver and set the remote to operate the receiver.
+ and – Used with REAR•CTR LEVEL button to adjust volume level of center and
rear speakers.
AM•FM Turns on the receiver and toggles between AM and FM bands.
BY-PASS Turns By-Pass Mode on and off. By-Pass Mode cancels all surround modes and
sound is produced with no surround effects.
CHAN (Channel) Up or Down Selects next higher or lower channel in the receiverÕs
channel memory.
CTR (Center) MODE Press to toggle through the center channel modes ( Normal, Wide, and
Phantom) when Dolby* Pro Logic or Cinema Surround mode is selected.
DELAY/CH CTRL Selects the amount of surround sound delay (15, 20, or 30 milliseconds)
between the main and rear speakers.
MUTE Reduces the receiverÕs sound to its minimum level.
Numbers (0 through 9) Used to enter or change numbers for preset stations, and to directly
access preset stations.
POWER Press once to turn off audio/video receiver. Press twice to turn off all components.
PREV CH•DISC Switches between the last two stations selected. Select one station, and
then use the number buttons to select another. Press PREV CH•DISC to toggle between
the two stations.
RESET•REP Used with number buttons to select or change number of preset station.
SURROUND Advances through surround modes: Pro Logic, Cinema, Theatre, Stadium,
Studio, Rock , and Simulated .
REAR•CTR LEVEL Toggles between the volume level adjustment for the rear and center
speakers. Use the + and – buttons to adjust volume of selected speaker(s).
VOL (Volume) Up or Down Raises and lowers volume of receiver.
* Dolby is a trademark of Dolby Laboratories Licensing Corp.
Using Your System Remote Control
(Continued)