Ricoh FAX5600L - Manual (Page 238)

OVER NO OF PROG RTI/CSI
You cannot store any RTIs or CSIs for use with this feature; the
limit has already been reached.
RTI/CSI IS NOT PROGRAMMED No RTIs or CSIs have been stored for this feature.
NO PAUSE
You must add a pause after your area code when you input
your fax terminal’s own telephone number.
SWITCH OFF AFTER PRINT OUT
You cannot switch Memory Lock off while there is a received
fax message in the memory. You must input the Memory Lock
ID and print the message first before switching Memory Lock
off.
NOT CHANGEABLE You cannot change the setting of this feature.
(FORWARDING)
If displayed under SET DOCUMENT in standby mode, this
indicates that Forwarding is now switched on.
(MEMORY LOCK)
If displayed under SET DOCUMENT in standby mode, this
indicates that Memory Lock is now switched on.
(RDS)
If displayed under SET DOCUMENT in standby mode, this
indicates that RDS is now switched on.
(POWER SAVER)
If displayed under SET DOCUMENT in standby mode, this
indicates that the Power Saver is now switched on.
ADD TONER The toner cartridge is empty. Install a new cartridge.
ADD PAPER IN CASSETTE NO._ The indicated cassette is now empty.
CHECK ID The ID that you entered is not correct. Try again.
COMMUNICATION FAIL
There was an error during a transmission or reception. Check
the error report.
CLEAR ORIGINAL A document is jammed in the feeder.
CLEAR COPY Paper is jammed in the printer.
CLOSE COVER A cover is not closed properly. Check that all covers are closed.
UNABLE TO PRINT IN COMM.
You cannot print a report or make a copy while the machine is
sending or receiving a fax message.
UNABLE TO PROGRAM
This Quick Dial Key already contains a number. Try another
Quick Dial Key.
DISPLAYED ERROR MESSAGES SOLVING PROBLEMS
224