Notes on remote control operation, Figure 3-1 . available range of the remote control, 1. available range of the remote control – Runco CINEWIDE VX-6000D User Manual
Page 34: Pre l iminar y
18
Runco VX-6000d Installation/Operation Manual
PRE
L
IMINAR
Y
Notes on Remote Control
Operation
The remote control can be used to control the VX-6000d within the ranges shown in
Figure 3-1.
Figure 3-1. Available Range of the Remote Control
• Do not drop the remote control or expose it to moisture or high temperature.
• The remote control may malfunction under a fluorescent lamp. If that occurs, move the
DHD Controller away from the fluorescent lamp.
• Make sure that there is nothing obstructing the infrared beam between the remote
control and the IR receiver on the DHD Controller or projector.
• If the effective range of the remote control decreases, or it stops working, replace the
batteries with new ones.
• Ambient conditions may possibly impede the operation of the remote control. If this
happens, point the remote control at the DHD Controller or projector and repeat the
operation.
➤
The signal from the remote control can be reflected by walls or
other surfaces.
SYSTEM
MENU
MENU
GUIDE
GUIDE
EXIT
INFO
DIS
PREV
PREV
CH
CH
+
-
+
-
MAIN
VX6K
ratio
ratio
i
n
p
u
t
standby
m
e
n
u
i
n
p
u
t
enter
3
HDMI
1
16:9 1080i/60
CUST
1
CUST
2
SVC
HDMI
1
HDMI
2
EXIT
RETURN
16 : 9
4 : 3
Approx.
40 feet
(12.2 meters)
Approx.
30º
Approx.
30º
Approx.
100 feet
(30.5 meters)
Note