Blackberry Curve 8520 - Manual (Page 221)

SSID:
Type the Wi-Fi network name.
Band type:
Set the Wi-Fi network type. If you do not know the network type, do not change this field.
Prompt before connection:
Set whether a prompt appears before your BlackBerry® device connects to the Wi-Fi network.
Allow inter-access point handover:
Set whether your device remains connected to the Wi-Fi network when you move between wireless access points.
VPN:
If necessary, set a VPN profile to use with the Wi-Fi profile.
Wi-Fi profile security options
Security Type:
Set the security type that the Wi-Fi® network supports.
Select WEP key:
Set the type of WEP key for the Wi-Fi network.
WEP key:
Type the WEP key for the Wi-Fi network in hexadecimal format.
Pre-Shared Key:
Type the WPA™ Personal pass phrase for the Wi-Fi network.
User name:
If necessary, type the user name that you use to connect to the Wi-Fi network.
User password:
If necessary, type the user password that you use to connect to the Wi-Fi network.
CA certificate:
Set the root certificate that your BlackBerry® device should use to verify that it is connecting to the correct Wi-Fi network.
Client certificate:
Set the authentication certificate that your device should use to connect to the Wi-Fi network.
Inner link security:
If necessary, set the security protocol that the Wi-Fi network supports for its inner authentication method.
Use hard token:
User Guide Advanced Wi-Fi connection settings
219