Rockwell SoniCrafter DEVICENET 1771-SDN - Manual (Page 50)

Publication 1771-6.5.132 - June 2000
3-12 Hardware Setup
Installing the
Series 9000 Photoeye Connect the photoeye to the network and configure the photoeye as
follows:
•
Node Address: 9
•
Operating Mode: Light Operate (default)
•
Baud Rate: 500 kb
For detailed directions, see the instructions that came with your
photoeye.
Programming
Pushbutton
Sensitivity
Adjustment
Yellow - Output
Green - Margin
Red/Green - Status
Top View of Series 9000 Photoeye
More