Rockwell SoniCrafter DEVICENET 1771-SDN - Manual (Page 113)

1 Publication 1771-6.5.132 - June 2000
Appendix
A
1785-ENET Module Channel Configuration
Configuring the
Communications Channel Before you can communicate with the PLC-5 processor over an
Ethernet network, you must configure the 1785-ENET module’s
Ethernet communications channel and download the configuration to
the PLC-5 processor. The following example describes how to do this
using RSLogix 5 software.
1. Select Channel Configuration under the Controller folder in the
Project window.
The Edit Channel Properties window will open.