Rockwell SoniCrafter DEVICENET 1771-SDN - Manual (Page 106)

Publication 1771-6.5.132 - June 2000
6-12 Creating and Running the Example Application Program
Downloading and Running the Program via a DH+ Network
Follow the procedure below to download and run the example
program via a DH+ network.
1. Click on the RSLogix 5 Comms menu and select System
Communications.
2. Click on the Who Active button.
RSLinx will open. You will see a window similar to the one below,
displaying your system’s driver configuration.
3. Expand the tree under your DH+ driver and highlight the PLC-5
processor as shown above. Click on OK.