Rockwell SoniCrafter DEVICENET 1771-SDN - Manual (Page 117)

Publication 1771-6.5.132 - June 2000
Installing and Configuring the ControlNet Communications Driver B-3
4. When prompted for a name for the new driver, select the default
name assigned by the system, i.e., AB_KTC-1.
The Configure Device window will appear:
5. Enter the following configuration:
6. Click on OK to save your settings.
7. Close RSLinx .
Station Name ABKTC
Net. Address
17
(1)
(1)
This is an unscheduled device. For maximum efficiency,
set its address higher than the highest scheduled
address on your network.
Interrupt None
I/O Base
240
(2)
(2)
Modify as necessary for your system.
Mem. Address
D000
(2)