Ricoh DIGITAL CAMERA GR User Manual

Page 67

ore

ho
togr
aP

Note

• Focus can be assigned to the ADJ. lever in ADJ Lever Setting

(page 117) or Fn buttons in Fn Button Pair Setting (page 119).
The Fn buttons can be used to switch back and forth between
autofocus and manual focus/snap focus/subject tracking focus.

• The following functions are not available for Subj. Tracking fo-

cus mode.
• Custom setting of the self-timer
• Interval shooting
• Bracketing
• AE/AF target selection
• Macro target

• If selecting On for Pre-AF in the shooting menu (page 61),

the camera automatically focuses on a subject in Multi AF or

Spot AF mode even if the shutter-release button is not pressed
halfway. This mode increases the drain on the battery.

• The external AF sensor is turned off and AF distance is not dis-

played when using the camera with AAA batteries or with an
optional wide conversion lens on.

• If On is selected for Optional AF Distance Display (page 126),

select Off for Sleep Mode and LCD Auto Dim in the setup
menu.

• When focus distance metering by the external AF sensor is not

available, 2.5m (8.2 ft) is set for the Auto setting of Snap Focus

Distance.