Ricoh DIGITAL CAMERA GR User Manual

Page 33

irst

time

ser

? r

ead

this

Select a flash mode.

Press the

button and press

# or $ to select a flash mode.

The flash mode icon is briefly

displayed in the center of the

picture display and then ap-

pears in the top left corner of

the display.

The autofocus/flash lamp blinks while the flash

charges. Photos can be taken when the lamp stops

blinking.

Note

• To close the flash when it is not in use, gently press the center of

the flash cover down until it latches.

• The flash has a range of approximately 20 cm to 3.0 m (8 in.–10 ft.),

measured from the front of the lens (auto ISO; see page 82).

• If the camera is powered by AAA batteries, the picture display will

turn off until charging is complete.

• A pre-flash is fired before the main flash to achieve optimal expo-

sure.

• Flash amount can be adjusted in Flash Exposure Compensa-

tion in the shooting menu (page 70).

Caution

• The flash turns off automatically in dynamic range, internal com-

posite, movie, continuous, and bracketing modes.

• Do not use the built-in flash with conversion lenses or lens hoods.