Ricoh DIGITAL CAMERA GR - Manual (Page 169)

159
t
echnic
al
n
o
tes
• Data may become corrupted if the AC adapter is disconnected or
power is interrupted while the camera is on.
• The battery indicator ( ) may be displayed while the AC
adapter is in use. This is normal, and you can continue using the
camera.
• Do not pick up the camera by the cable when the AC adapter is
attached.
• The adaptor cannot be used depending on country or region.
Flash Unit
An optional GF-1 flash unit (TTL autoflash system) can be
connected to the camera hot shoe.
1
Close the flash cover.
2
Remove the hot shoe cover from the hot shoe of
the camera.
3
Attach the flash.
Turn the camera and the GF-1
off and attach the GF-1 to the
hot shoe.
Hot shoe
4
Turn the flash and camera on.
Note
• If the optional flash unit icon is not displayed, turn the GF-1 and
camera off and then remove and reattach the flash.
• Switch the flash modes by pressing the F button. If using the
manual flash, set the flash mode to the manual flash setting in
both of the camera and GF-1. The flash amount can be selected
in Manual Flash Amount in the shooting menu (page 71).
• Optional flash unit cannot be used in interval shooting, dynamic
range shooting, and interval composite shooting.