Ricoh DIGITAL CAMERA GR - Manual (Page 51)

41
m
ore
on
P
ho
togr
aP
hy
3
Press the shutter-release button halfway.
Press the shutter-release button halfway to focus.
4
Take the photograph.
Gently press the shutter-release button the rest of
the way down to shoot.
Note
• If Auto or Auto-Hi is selected for ISO Setting (page 82), ISO
will be set to a value between 100 and 400 while the camera is in
manual exposure mode.
• Functions assigned to 8 and 9 buttons, up-down dial, and ADJ.
lever which are used in mode M can be changed in M Mode
Dial Options and One Press M Mode in the key custom settings
(pages 121 and 122).
• B (Bulb) or T (Time) can be selected for the shutter speed in
mode M. In the B setting, the shutter is opened to expose while
the shutter-release button is pressed. In the T setting, press the
shutter-release button to open and close the shutter. The shoot-
ing ends automatically after 180 seconds elapsed.
You can use an optional CA-2 cable switch wired remote shutter
release.
In the B and T settings, the following functions are not available.
• Self-timer
• Interval shooting
• Bracketing
• One Press M Mode
• If setting Continuous Mode in the shooting menu when B or
T is selected, the shutter speed will be automatically set to 180
seconds. B or T setting cannot be selected if Continuous Mode
has been selected.
Caution
• Noise reduction is applied to an image if the shutter speed is set
to more than 10 seconds. It may take a while to save the image.