Ricoh DIGITAL CAMERA GR - Manual (Page 112)

102
m
ore
on
P
la
yba
ck
4
Tune the television to the video channel.
Select video input. See the television manual for de-
tails.
5
Turn the camera on.
Note
• The camera supports the following video standards: NTSC (used
in North America, the Caribbean, parts of Latin America, and
some East Asian countries) and PAL (used in the United Kingdom
and much of Europe, Australia, New Zealand, and parts of Asia
and Africa). SECAM is not supported. Where possible, the camera
is set to the standard used in your country or region before ship-
ment; before connecting the camera to a device that uses a dif-
ferent video standard, choose the appropriate video mode (page
133).
Connecting to a TV using an HDMI Cable
Connect the camera to AV devices equipped with HDMI
terminals using an optional HDMI cable (HC-1).
1
Turn the camera off.
Be sure the camera is off before connecting or dis-
connecting an HDMI cable.
2
Connect the HDMI cable to the TV.
3
Connect the camera.
Open the terminal cover and
plug the cable into the HDMI
connector. Do not use force.
4
Tune the television to the vid-
eo channel.
Select video input. See the television manual for de-
tails.