System menu> j 39.active ptl. l, Active ptl.> j *all active l, System menu> j 32.ip address l – Ricoh AP305 User Manual
Page 54: 044 j jl
Configuring the Printer for the Network with the Operation Panel
24
3
Note
❒ It is recommended that you do
not select protocols that are not
used on your network.
Limitation
❒ If you want to select EtherTalk,
you should install the optional
RICOH-SCRIPT2 Type305.
A Press {{{{U
U
U
U}}}}{{{{T
T
T
T}}}} until the follow-
ing message appears.
39.Active PTL. l
B Press {{{{
Enter
}}}}.
The current setting appears on
the panel display.
*All Active l
C Press {{{{U
U
U
U}}}}{{{{T
T
T
T}}}} until the proto-
col you want to use appears.
D Press {{{{
Enter
}}}}.
E
If you use TCP/IP, you should as-
sign the IP address to your print-
er.
Note
❒ To get the IP address for your
printer, contact your network
administrator.
❒ If you use TCP/IP, you should
assign the IP address to your
printer.
A Press {{{{U
U
U
U}}}}{{{{T
T
T
T}}}} until the follow-
ing message appears.
32.IP Address l
B Press {{{{
Enter
}}}}.
The current IP address appears
on the panel display.
011.022.033.044
j jl/#
C Use {{{{U
U
U
U}}}}{{{{T
T
T
T}}}} to specify the left-
most digit of the IP address.
111.022.033.044
j jl/#
D Press {{{{
Enter
}}}}.
The pointer (
U) moves to the
next digit as shown.
111.022.033.044
j jl/#
Note
❒ You can return the pointer
(
U) to the previous (left) digit
by pressing
{
Escape
}.
❒ If you press
{
Escape
} when
the pointer (
U) is on the left-
most position, the specified
IP address is reset.
E Use {{{{U
U
U
U}}}}{{{{T
T
T
T}}}} to specify the sec-
ond digit of the IP address.
191.022.033.044
j jl/#
F Press {{{{
Enter
}}}}.