Renesas Emulation Pod M3062PT3-RPD-E - Manual (Page 96)

M3062PT3-RPD-E User’s Manual 5. Troubleshooting
REJ10J0040-0600 Rev.6.00 July 01, 2006 Page 96 of 104
5. Troubleshooting
This chapter describes how to troubleshoot when this product does not work properly.
5.1 Flowchart to Remedy the Troubles
Figure 5.1 shows the flowchart to remedy troubles from when power to the emulator is activated until the emulator debugger
starts up. Check this while the user system is not connected. For the latest FAQs visit the Renesas Tools Homepage.
http://www.renesas.com/en/tools
Turning on the power of PC4701
Not normal
PC4701 Front panel LEDs
1. Check emulator system connections.
See "2.4 Connecting the PC4701" (page 23).
2. Redownload the firmware.
See "2.6 Downloading Firmware" (page 27).
3. Restart the PC4701 system.
Not normal or error displayed
Init dialog box of emulator debugger
displayed
1. Check the operating environment etc. of the emulator
debugger.
See the emulator debugger user's manual (online manual).
2. Reinstall the emulator debugger.
Error displayed
See "5.2 (2) Editor (Source) Window is Not Displayed at
Debugger Startup (User System Connected)" (page 98).
See "5.2 (3) Editor (Source) Window is Not Displayed at
Debugger Startup (User System Not Connected)" (page
99).
Editor (source) window of emulator
debugger displayed
Figure 5.1 Flowchart to remedy troubles