Renesas Emulation Pod M3062PT3-RPD-E - Manual (Page 42)

M3062PT3-RPD-E User’s Manual 2. Setup
REJ10J0040-0600 Rev.6.00 July 01, 2006 Page 42 of 104
(3) Replacing Oscillator Circuit Boards
Figure 2.19 shows how to replace the oscillator circuit boards. For the position of the oscillator circuit board, see Figure 2.18.
(1) Unscrew the screw securing the oscillator circuit board.
(2) Lift off the oscillator circuit board.
(3) Insert the connector of a new oscillator circuit board to the
connector of the main board.
(4) Secure the new oscillator circuit board with the screw.
Figure 2.19 Replacing oscillator circuit boards
CAUTION
Note on Replacing the Oscillator Circuit Board:
z Always shut OFF power when replacing oscillator circuit board. Otherwise, internal circuits may be damaged.