Roland TD-6 - Manual (Page 23)

23
Making the Settings
Setup Guide
Connecting Headphones, Audio
Equipment, Amps, and Other Gear
fig.P-010
1
Turn off the power of all devices before you make connections.
To prevent malfunction and/or damage to speakers or other devices, always
turn down the volume, and turn off the power on all devices before making
any connections.
2
Connect the supplied AC adaptor to the AC adaptor jack.
3
Connect the OUTPUT L(MONO) and R jacks on the rear panel to your
audio system or amp. If using headphones, connect them to the
PHONES jack.
4
Plug the AC adaptor plug into a power outlet.
L
R
Stereo miniature phone type
CD/MD deck, cassette player, etc.
To prevent the inadvertent
disruption of power to
your unit (should the plug
be pulled out accidentally),
and to avoid applying
undue stress to the AC
adaptor jack, anchor the
power cord using the cord
hook, as shown in the
illustration.
Using the TD-6’s MIX IN
Jack, allows you to play
along with a CD or other
such sound input (p. 53).