Ricoh FAX2050L - Manual (Page 191)

Connecting the Machine
111
10
Connecting the Machine
Before using the machine, connect the machine to the telephone line properly.
Then plug in the power cable and switch on.
Make sure the machine is properly connected to the telephone line and the pow-
er outlet.
Do not switch on until everything is connected properly.
Program the Telephone Line Type setting (use Function 62; see P.73 “Setting the
Phone Line Type (Function 62)”). If your telephone normally sends out tones
(touch tone) when dialing, use the TT setting; if it normally sends out pulses (ro-
tary dial), use the DP setting. Also, make sure that the switch on the handset is
set up correctly.
Note
❒ This function is not available in some areas.