Ricoh FAX2050L - Manual (Page 147)

Using Key Operator Settings
67
7
Programming the ID Code
To store an ID Code, do the following.
A
Press
{Function} {6} and enter the
access code
{2} {2} {2} {2}. Press
{6} {1}, and then the {Yes} key.
Y/NEXTi
SET OWN NUMBER
B
Press
V until the following dis-
play is shown.
Y/NEXTi
SET POLLING ID
C
Press the
{Yes} key.
POLLING ID KPAD
kkkk
D
Enter the ID Code that you will be
using.
POLLING ID Y/N
4363
Note
❒ Example: {4} {3} {6} {3} from
the ten key pad.
❒ Do not use 0000 and FFFF.
E
Press the
{Yes} key, and then the
{Function} key.
Editing the ID Code
If you want to change the ID Code, do
the following.
A
Press
{Function} {6} and enter the
access code
{2} {2} {2} {2}. Press
{6} {1}, and then the {Yes} key.
Y/NEXTi
SET OWN NUMBER
B
Press
V until the following dis-
play is shown.
Y/NEXTi
SET POLLING ID
C
Press the
{Yes} key.
POLL. ID CHANGE? Y/N
1234
D
Press the
{Yes} key, and then the
{No} key.
POLLING ID KPAD
kkkk
E
Input a new ID.
POLLING ID Y/N
5433
Note
❒ Example: {5} {4} {3} {3} from
the ten key pad.
F
Press the
{Yes} key, and then the
{Function} key.