Ricoh FAX2050L - Manual (Page 124)

Key Operator Settings
44
7
D
To store your setting, press the
{Yes} key.
E
Press the
{Function} key to finish.
Selecting the Display
Language (Function 93)
If you would rather use another lan-
guage for messages and displays, fol-
low the procedure below. The three
languages are available: English,
French, and Spanish.
A
Press
{Function} {6} and enter the
access number
{2} {2} {2} {2}.
Press
{9} {3}, and then the {Yes}
key.
SELECT LANGUAGE Y/hi
ENGLISH
B
Use
W and V to scroll through the
available languages.
CHOIX LANGUE O/hi
FRANCAIS
C
Press the
{Yes} key, and then the
{Function} key to return to the
ready state.
Counters (Function 94)
These counters will help you if you
wish to keep a regular check on how
many pages your machine has sent,
received, and copied. The machine
has the following counters:
❖ TX Counter:
The number of pages that your ma-
chine has sent (transmitted)
❖ RX Counter:
The number of pages that your ma-
chine has received
❖ Scan Counter:
The number of pages that your ma-
chine has scanned (including cop-
ies)
❖ Print Counter:
The number of pages that your ma-
chine has printed (including cop-
ies, reports and lists.)
A
Press
{Function} {6} and enter the
access code
{2} {2} {2} {2}. Press
{9} {4}, and then the {Yes} key.
TX :003256
RX :002648
B
Press the
{Yes} key to check the
SCAN and PRINT counter.
SCAN : 003287
PRINT : 002703
C
When you have finished, press
the
{Function} key.
Function Select
Switching Forwarding On / Off (Function 62)
Before you use Forwarding, you have
to switch it on using Function 62. If it
is switched off, the machine will not
forward any incoming fax messages.
A
Press
{Function} {6} and enter the
access code
{2} {2} {2} {2}. Press
{6} {2}, and then the {Yes} key.
Y/NEXTi
SELECT LINE
Display might differ according to
your local.