User parameters, Setting? y/h print list h – Ricoh FAX2050L User Manual
Page 138
Key Operator Settings
58
7
User Parameters
Adjusting your machine sometimes requires that you change special settings
called user parameters. For each user parameter, you must change a bit in a
switch.
A switch has eight bits. Each bit has a value of 1 or 0, and each bit is numbered
0 to 7 from the right.
❖ Bit Values and Bit Numbers
In the following example we will change bit 3 of switch 05 in the user parame-
ters.
A
Press
{Function} {6} and enter the access code {2} {2} {2} {2}. Press {6} {3},
and then the
{Yes} key.
The following display appears.
SETTING? Y/h
PRINT LIST h
Note
❒ You can press the W key to see a list. Otherwise, press the {Yes} key.
B
Press the
{Yes} key again and use W and V to change switches.
Note
❒ For example, go to switch 05 by pressing V five times.
KPAD/Y/hi
SWITCH 05 :1000 0001
C
To change bit 3, press
{3} on the ten key pad.
Bit 3 will change from 1 to 0 or from 0 to 1.
KPAD/Y/hi
SWITCH 05 :1000 1001
Note
❒ To change bit 0, press {0}. To change bit 1, press {1} and so on.
D
Press the
{Yes} key, and then the {Function} key.
Bit Number
7
6
5
4
3
2
1
0
Bit Value
↓
↓
↓
↓
↓
↓
↓
↓
0
1
0
0
0
0
0
0