Ricoh FAX2050L - Manual (Page 16)

Introduction
6
1
11. Manual Receive indicator.
Lights when the reception mode is Tele-
phone.
12. {Energy Saver} key
Hold the button a few seconds to start or
end the energy saver mode.
13. {Copy} key
Press this to copy the document now in
the feeder.
14. {Reception Mode} key
Press this to select the reception mode
(Tel or Fax).
15. {Function} key
Press the
{Function} key and enter a two
digit code to access functions 11 to 53.
(For Functions 61 to 95, enter 6, and then
the access code.)
16. {Stop} key
Press the
{Stop} key to stop a transmis-
sion or a document scanning, and a re-
ception or to stop a long copy run. The
machine will print out the sheet being
printed and then stop.
17. {Start} key
Press the
{Start} key to start all tasks.
18. Ten key pad
Use the ten key pad (sometimes called
the ten keys) to dial fax numbers, to enter
the numbers of copies, etc.
19. {On Hook Dial} key
Press the
{On Hook Dial} key to dial a
phone call from the keypad without hav-
ing to lift the phone or handset off the
hook (phone or handset option needed).
20. {Clear} key
Press the
{Clear} key to erase the last
character or digit entered, or use the left
and right arrow keys to move the cursor
and then press Clear to erase whatever is
at the cursor.
21. {Quick Dial} keys/ {User Function}
keys.
There are 30 Quick Dial keys. Use them to
store individual fax numbers (see P.22
“Storing and Editing Fax Numbers (Func-
tions 31 & 32)”) or groups (see P.25 “Stor-
ing and Editing a Group of Fax Numbers
(Function 33)”). You can also use these
keys to enter characters (see P.29 “Enter-
ing Characters”). In addition you can reg-
ister Quick Dial 29 as the Dial Option key
(see Chapter 3, “Assigning the Dial Op-
tion key” in the Advanced Features man-
ual.) You can also use Quick Dial 30 as a
Group key (see P.28 “Programming the
Group Key”).
You can store a combination of settings
that you use frequently in the two User
Function keys (F1, F2). When you press a
User Function key, it lights to show you
that it is selected.