Setting originals, Setting originals on the exposure glass, 2setting originals – Ricoh 450 User Manual

Page 47

SETTING ORIGINALS

SETTING ORIGINALS

Limitation

❒ Set the original after correction flu-

id and ink has completely dried.
Not taking this precaution could
mark the exposure glass and cause
marks to be copied.

Note

❒ Basically the originals should be

aligned to the rear left corner.
However, some copy functions
may produce different results de-
pending on the direction of the
originals. For details, see explana-
tions of each function.

Reference

See

⇒

P.20 “Originals”.

Setting Originals On The
Exposure Glass

Lift the platen cover or the docu-
ment feeder.

Note

❒ Be sure to open the platen cover

or the document feeder by more
than 30

°,

otherwise the original

size might not be detected cor-
rectly

Set the original face down on the
exposure glass. The original
should be aligned to the rear left
corner.

1: Reference mark
2: Scale

Lower the platen cover or the doc-
ument feeder.

Originals

Set in the
document
feeder

Set on the
exposure
glass

set1EE

set2EE

ND1C01EE

This manual is related to the following products:

340 350