Printing and scanning, Setting up – Ricoh BIZWORKS 106 User Manual
Page 247
23
3. PRINTING
AND SCANNING
3. PRINTING AND SCANNING
When connected to a compatible PC, you can use this machine as a high
performance laser printer and black and white scanner.
Important!
• Make sure that your PC parallel port is set to ECP. If it is not, please consult your
PC manual on how to change it.
Note
•
For information on PC hardware and software requirements, please read the
README file on the CD.
•
Printer drivers are provided for both Windows
©
95/98 and Windows
©
3.1, but
the scanning feature requires Windows
©
95/98.
Setting up
Before you can start printing and scanning you need to the following if you
have not done so already:
• Connect the machine to your PC
• Install the software drivers on your PC
Installing the Software Drivers
Follow the steps below to install the printer/scanner drivers on your PC.
1
Make sure the machine is connected to your PC and paper is loaded in
the upper paper tray.
☛ Connecting to a computer, See page 7
☛ Loading Paper, See page 10
2
Switch the machine on.
3
Insert the provided software CD into your CD-ROM drive.